Daewoo Solar 300LC-V, Руководство пользователя

Страница: 24 / 658

S0102000
Page 16 Track Excavator Safety
BEFORE STARTING ENGINE
WORK SITE PRECAUTIONS
Before starting operations, thoroughly check the area for any unusual conditions that could be dangerous.
Check the terrain and condition of the ground at the work site, and determine the best and safest method of
operation.
Make the ground surface as hard and horizontal as possible before carrying out operations. If there is a lot
of dust and sand on the work site, spray water before starting operations.
If you need to operate on a street, protect
pedestrians and cars by designating a person
for work site traffic duty or by erecting fences
and posting "No Entry" signs around the work
site.
Erect fences, post "No Entry" signs, and take
other steps to prevent people from coming close
to or entering the work site. If people come
close to a moving machine, they may be hit or
caught by the machine, and this may lead to
serious personal injury or death.
Water lines, gas lines, phone lines and high-
voltage electrical lines may be buried under the
work site. Contact each utility and identify their
locations. Be careful not to damage or cut any of
these lines.
Check the condition of the river bed, and the
depth and flow of the water before operating in
water or crossing a river. NEVER be in water
that is in excess of the permissible water depth.
Any type of object in the vicinity of the boom
could represent a potential hazard, or cause the
operator to react suddenly and cause an
accident. Use a spotter or signal person working
near bridges, phone lines, work site scaffolds, or
other obstructions.
DANGE
R
No Entr
y
ARO1250L
Figure 13
Figure 14