![Daewoo DWD-WD135 SERIES Скачать руководство пользователя страница 47](http://html1.mh-extra.com/html/daewoo/dwd-wd135-series/dwd-wd135-series_service-manual_499188047.webp)
46
3) H5 Error - Water temperature error in wool/ delicate course
%
In case water temperature in wool/ delicate course is 45
)
or higher
&
Error buzzer alarm is sounded for 10 seconds per every 10 minutes.
'
Error display is cleared when turning off/ on power.
4) H6 Error - Abnormality in washing heater
%
Within 15 minutes after heater operation begins;
In case standard temperature is of 42
)
or lower: If temperature does not increase by 2
)
or more In
case standard temperature is higher than 42
)
: If temperature does not increase by1
)
or more
&
If temperature falls below standard temperature by 2
)
or more due to re-supply of water, etc.,
standard temperature is reset as the current temperature and error check time of15 minutes is reset.
'
Error buzzer alarm is sounded for 10 seconds per every 10 minutes.
(
Error display is cleared when turning off/ on power.
5) H8 Error - Washing heater overheating
%
In case washing heater temperature increases by 5
)
or more within 30 seconds when there is no
water in tank, etc.
&
Error buzzer alarm is sounded for 10 seconds per every 10 minutes.
'
Error display is cleared when turning off/ on power.
6-11. PFE (Pump Filter Error)
%
Cycle is skipped to the next when the current r.p.m. is different from the target r.p.m by 70 during
interim spin-drying.
&
Cycle is skilled to balance spin-drying when the current r.p.m is different from the target r.p.m by 70
during main spin-drying.
'
'PFE' error is caused if main spin-drying skip of
&
above occurs 10 times.
(
Error display is cleared when turning off/ on power.
Содержание DWD-WD135 SERIES
