6
INLET HOSE CONNECTION
The new hose-sets supplied with the appliance are to be used and old hose-sets should not be
reused.
In using only one water tap or in case of only one water inlet valve, connect the inlet hose to the
cold water inlet valve.
Option : Be careful not to confuse hot water inlet and cold water inlet.
For Ordinary Tap
1
Pull down the collar of the
inlet hose to separate it
from the water tap
adapter.
2
Loosen the four screws
properly in order to fit into
water tap.
3
Fit the water tap adapter
into the water tap and
tighten the four screws
evenly while pushing up
the adapter so that the
rubber packing can stick
to the water tap tightly.
1
Connect the inlet hose to
the water tap by screwing
the connector tightly.
2
Connect the connector-
inlet supplied if necessary.
3
Connect the inlet hose
adapter to the water inlet
of a washer and turn it to
be fixed.
4
Remove the tape, and
screw connector B into
connect A tightly.
5
Connect the inlet hose to
the water tap adapter by
pulling down the collar of
the hose end.
6
Connect the inlet hose
adapter of the hose to the
water inlet of the washer
by turning it clockwise to
be fixed tightly.
For Screw-Shaped Tap
• Please check the rubber packing
present inside the inlet hose
adapter of the hose.
*Check the
packing in the
inlet.
Connector B
Connector A
Connector
Hose
Connector
Rubber
Packing
Connector
inlet
Connector
Hose
Connector
Rubber
Packing
TAPE
DWD-AD123'S(영)_요르단 ZHRN.indd 6
2017. 7. 11. 오후 2:00