30
HOW TO CLEAN THE FILTER
1
100
2
3
2
3
1
100
2
3
2
3
1
100
Cleaning the water inlet filter
• Clean the filter when water leaks from the water inlet.
Cleaning the drain filter (For Pump Model)
• This drain filter is used to screen the foreign stuffs such as threads, coins, pins, buttons etc..
• If the drain filter is not cleaned at proper time(every 10 times of use), drain problem could be
caused.
CAUTION : Be careful when draining if the water is hot.
1
Pull the power
plug out before
cleaning it.
2
Turn off the water
supply to the
washer and
separate the inlet
hose.
3
Pull the inlet filter
out.
4
Remove the dirt
from the inlet filter
with a brush.
1. Open the lower cover(
1
) by
using a coin. Remove the cap
hose(
2
) to pull out the hose.
2. Unplug the cap hose(
2
),
allowing the water to flow out. At
this time use a vessel to prevent
water flowing on to the floor.
When water does not flow any
more, turn the pump filter(
3
)
open to the left.
3. Remove any foreign material
from the pump filter(
3
). After
cleaning, turn the pump filter
clockwise and insert the cap
hose(
2
) to the original
place.
Close the lower cover.
DWD-AD123'S(영)_요르단 ZHRN.indd 30
2017. 7. 11. 오후 2:00
