27
* RINSE + SPIN PROGRAM
1
Put the laundry into the Drum and put softener into the detergent case.
Then close the Door.
• Softener should be below ‘MAX’ level.
2
Press the Power button.
• The LED shows only ‘- --’ signal.
3
Select the 'RINSE+SPIN' program using program selection dial.
• ‘800’ rpm spin speed and ‘COLD’ water temperature are selected automatically.
• If you want to change Rinse time or Spin velocity, press each corresponding button.
• If you press Start/Pause button after power button without selecting program, the
‘Cotton’ program is selected as default program.
4
Press the ‘Start/Pause’ button.
• The washer will be operated with locking Door.
NOTE
• If you want to change the setting during operation, press the Start/Pause button to hold the operation
and press the button you want.
DWD-AD123'S(영)_요르단 ZHRN.indd 27
2017. 7. 11. 오후 2:00
