22
* BABY CARE PROGRAM
1
Put the laundry in the drum. Put detergent and softener into the detergent case.
Then close the door.
• Choose the detergent/softener insert method.
• When you want to use bleach, put it into the manual detergent compartment with
detergent.
2
Press the Power button.
• The LED shows only '- --' and all Program Lights turn on.
3
Select the 'Baby Care' program using program selection dial.
• If you press Start/Pause button after power button without selecting program, the
‘Cotton’ program is selected as default program.
• Washing temperature '40°C', rinse '4', spin '400'rpm, 'are selected automatically.
• If you want to change water temperature and Rinse time and rpm of Spin, press
each button.
4
Press Start/Pause button.
• The washer will be operated with locking Door and supplying water.
NOTE
• The appropriate amount of laundry for Baby Care program is below 2kg.
• If you want to change the setting during operation, press the Start/Pause button to hold the operation
and press the button you want.
• Washing temperature is selectable '20°C' , '40°C', 60°C' 95°C'
CAUTION
• If you select washing temperature ‘95’ °C, some cold water is supplied before the drain of main wash.
This is to protect the user from the hazard of burn injury by lowering the temperature of hot wash water
instead of directly draining it. Therefore this is not a malfuction.
(Be careful with the draining water, since it can be still hot although the temperature is lowered.)
DWD-AD123'S(영)_요르단 ZHRN.indd 22
2017. 7. 11. 오후 2:00
