Daewoo DABS 950, Руководство пользователя

Страница: 7 / 12

www.daewoopower.bg
7
EN
-
７
Maneuver the sanding belt off the rollers. NOTE : The Sanding belt has directional
arrows printed on the inside of the belt (see
1 of Fig.8)
Fig.8
Sanding belts come in different grades i.e.
rough through to smooth. Select the grade
according to the material operated on.
Locate the sanding belt on the rollers (see
Fig.9)Make sure the sanding belt does not
touch the sides of the casing and that the
arrows, printed on the inside of the sanding
belt point in the direction of travel. Release
the tension lever.
Fig.9
NOTE : Caution is required as the lever is
under spring tension. Make sure the lever
closes fully. With the new sanding belt fitted
it must be checked to ensure that it is
running centrally on the rollers (see section
Centralizing the Sanding Belt).
MAINTENANCE
WARNING
. Always ensure that the tool is
switched off and the plug is removed from
the power point before making any
adjustments or maintenance procedures.
Keep the tools air vents unclogged and
clean at all times.
1.
Regularly check to see if any dust or
foreign matter has entered the grills
near the motor and around the trigger
switch. Use a soft brush to remove
any accumulated dust. Wear safety
glasses to protect your eyes whilst
cleaning.
2. Re-lubricate all moving parts at
regular intervals.
3. If the body of the sander needs
cleaning, wipe it with a soft damp
cloth. A mild detergent can be used
but nothing like alcohol, petrol or other
cleaning agent.Never use caustic
agents to clean plastic parts.
CAUTION
!Water must never come into
1