Daewoo DABS 950, Руководство пользователя

Страница: 3 / 12

www.daewoopower.bg
3
EN
-
３
GENERAL SAFETY RULES
a key that is left attached to a rotating
part of the tool may result in personal
injury.
5. Do not overreach. Keep proper footing
and balance at all times. Proper
footing and balance enable better
control of the tool in unexpected
situations.
6. Use safety equipment. Always wear
eye protection.Dust mask, non-skid
safety shoes, hard hat, or hearing
protection must be used for
appropriate conditions. Ordinary eye or
sun glasses are NOT eye protection.
Tool Use and Care
1. Use clamps or other practical way to
secure and support the work piece to a
stable platform. Holding the work piece
by hand or against your body is
unstable and may lead to loss of
control.
2. Do not force tool. Use the correct tool
for your application. The correct tool
will do the job better and safer at the
rate for which it is designed.
3. Do not use tool if the switch can not
turn on or off. Any tool that cannot be
controlled with the switch is dangerous
and must be repaired before use.
4. Disconnect the plug from the power
source before making any adjustment,
changing accessories, or storing the
tool. Such preventive safety measures
can reduce the risk of starting the tool
accidentally.
5. Store idle tools out of reach of children
and other untrained persons. Tools are
dangerous in the hands of untrained
users.
6. Maintain tools with care. Keep the
cutting tools sharp and clean. Properly
maintained tools with sharp cutting
edges are less likely to bind and are
easier to control.
7. Check for misalignment or binding of
moving parts, breakage of parts and
any other condition that may affect the
tools operation. If damaged, have the
tool serviced before using. Many
accidents are caused by poorly
maintained tools.
8. Use only accessories that are
recommended by the manufacturer for
your model. Accessories that may be
suitable for one tool, may become
hazardous when used on another tool.
Service
1. Tool service must be performed only by
qualified repair personnel. Service or
maintenance performed by unqualified
personnel could result in a risk of
injury.
2. When servicing a tool, use only
identical replacement parts. Follow
instructions in the maintenance section