Daewoo DABS 950, Руководство пользователя

Страница: 8 / 12

www.daewoopower.bg
8
EN
-
８
contact with the sander.
4.
During use, the carbon brushes will
wear down and will be indicated by a
possible loss of power and excessive
sparking seen through the ventilation slots.
When the carbon brushes have worn down
to approximately 4-5mm, they will require
replacing.
Caution!
Make sure that the sander is
isolated from the mains power supply
before fitting accessories, maintenance and
adjustment if in doubt consult a qualified
electrician.
Place the sander on a workbench and using
a screwdriver remove the carbon brush
housing cover (see 1 of Fig.10).
Remove the carbon brush from the brush
housing and replace it with a new one. Slide
the new carbon brush (see 1of Fig.11) into
the brush housing. Repeat this procedure
for the other carbon brush. Then replace
the carbon brush housing cover.
Note: carbon brushes must be replaced in
pairs.
Fig.10
Fig.11
ACCESSORIES

dust bag--------------------------------1pc

sand belt-------------------------------1pc(fitted)

instruction manual-------------------1pc
1
1