8
Cyclone Digi One 29.6V Cordless Vacuum
FLR00043
User Manual
IMPORTANT
–
RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
3.
Right:
Place your foot gently on the
Motorised Floor Tool
(16) and pull the
cleaner back by the
Handle
(9) and start
vacuum cleaning.
Press the
On/off Trigger Switch
(8) again at
the end of cleaning to switch the cleaner off.
Far Right
: Press the catch on the Flexi joint
(arrowed right) to release the
Aluminium
Flexi Tube
(21) so that the tube can
‘flex’
in
order to clean under furniture and other
close to the ground objects.
Using the Crevice & Upholstery Tool (17)
1.
Attach the
Crevice Tool & Upholstery Tool
(17) onto the
Aluminium Flexi Tube
(21) to
clean carpet edges and hard to get at areas:
3
4.
Left:
If the
Aluminium Flexi Tube
(21) is not
required, the
Motorised Floor Tool
(16) can
be attached directly to the vacuum as shown
left for cleaning hard to get at areas such as
stairs, car seats, etc.
Left
: Slide the brush back on
the tool to reveal the crevice
tool to clean carpet edges,
etc. Alternatively use the
Long Reach Crevice Tool
(24).
Right
: Pull the brush down
on the tool to clean curtains,
upholstery, etc.
4
