16
Cyclone Digi One 29.6V Cordless Vacuum
FLR00043
User Manual
IMPORTANT
–
RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
Troubleshooting Guide
Problem
Possible Cause
Solution
Unit fails to turn on.
Internal battery not
charged.
The charger is not plugged
into the mains socket.
Charge the internal battery.
Ensure the charger is fully
inserted into the socket and
the socket is switched on.
Low suction or poor pick-up. Dust Compartment is full.
Filters are clogged.
Low Power Selected
Empty the cylinder.
Check and clean the filters.
Press the Min/Max Power
Button (8)
The vacuum is making a
“hissing” sound.
The airflow is restricted
Empty the Dust Compartment.
Check and clean the filters.
Clear any blockages if
necessary.
Brush Blockage Indicator
(31) not lit
The Carpet Brush (22) or
Hard Floor Roller (23) is
obstructed and/or tangled
with hair and debris
Switch off the vacuum cleaner
and remove obstruction from
the Carpet Brush (22) or Hard
Floor Roller (23).
Air Intake Blockage Indicator
(32) not lit
The Aluminium Flexi-Tube
(21) and/or vacuum Air
Inlet (5) are blocked.
Switch off the vacuum cleaner
and remove obstruction from
the Aluminium Flexi-Tube (21)
and/or vacuum Air Inlet (5)
Dust Sensor Failure (27)
Indicator not lit
The vacuum is very dirty
and/or blocked and the
Dust Compartment full.
Switch off the vacuum cleaner
and empty and clean the Dust
Compartment (3), Filters (2),
Aluminium Flexi-Tube (21)
and/or vacuum Air Inlet (5)
Waste electrical products should not be disposed of with household waste. Please
recycle where facilities exist. Check with your Local Authority or retailer for recycling advice.
