7
Cyclone Digi One 29.6V Cordless Vacuum
FLR00043
User Manual
IMPORTANT
–
RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
3.
Place the brush bearing (c.) onto the end of the
Hard Floor Brush
(23) as shown above left.
Once in place, insert the
Hard Floor Brush
(23) into the
Motorised Floor Tool
(16) as shown
above right.
Using Your Cyclone Digi-Flex Vacuum Cleaner
1.
Right:
Grasp the vacuum cleaner firmly by
the
Handle
(9) and press the
On/off Trigger
Switch
(8) to power up the cleaner.
d.
3
1
c.
c.
4.
Finally, hook the brush bearing retaining clip
at the front edge (d) and push down into
until it clicks into place (e) as shown left.
The vacuum is now ready to clean hard
floors.
4
c.
2.
Left:
During use, refer to the
Information
Screen
(25), press the
Eco Speed
(33) to
lower the vacuum speed/suction or
High
Speed
(28) to increase speed/suction. The
Speed/Suction Indicator
(34) will move to
show the current speed/suction level (low
to high) selected.
Alternatively press the ‘AUTO’ mode so that
the vacuum will automatically vary the
speed/suction power for the conditions.
2
e.
33
28
