6
Cyclone Digi One 29.6V Cordless Vacuum
FLR00043
User Manual
IMPORTANT
–
RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
Attaching the Accessories
CAUTION
Ensure that the vacuum cleaner is not connected to the mains charger before use.
The Floor Attachment
1.
Push the
Aluminium Flexi Tube
(21) onto the
Air Intake
(13) until it clicks home as shown
below:
2.
Push the
Motorised
Floor Tool
(16) onto the other end of the
Aluminium Flexi Tube
(21)
again until it clicks home.
Selecting the Correct Brush for the Motorised Floor Tool (16)
1.
Before using the
Motorised Floor Tool
(16), first choose the appropriate brush
type for the floor type being cleaned:
Select the
Carpet Brush
(22) for vacuum
cleaning carpets, rugs, etc.
Select the
Hard Floor Brush
(23) for
cleaning vinyl, laminate, tiled floors, etc.
c.
1
2.
To change the brush attachment,
slide the catch (a) to the left and lift
up the brush bearing retaining clip (b)
on the underside of the
Motorised
Floor Tool
(16) as shown left.
NB
the
Carpet Brush
(22) is currently
fitted in this example.
Lift out the
Carpet Brush
(22) and the
brush bearing (c). Remove the brush
bearing from the
Carpet Brush
(22).
2
a.
b.
