EN
11
AUX INPUT
Turn it ON and switch into AUX mode, the LED will show “AU”, plug any audio device such as
MP3 player, cell phone etc. into the AUX input jack using a 3.5mm cable, to output external
audio source via this radio clock.
Press V+ (10) or V- (4) button short time to adjust the volume level.
CLEANNING AND MAINTENANCE
If the radio clock body is very dirty, please immerse a soft cloth into clean or soapy water and
drain the excess water to wipe the body.
Never use alcohol, oil etc. to clean the housing.
SPECIFICATIONS
Output power(RMS):
10 W
Power supply:
230/50 HZ
Batteries:
AA,UM-3 1.5VX2 (only for clock)
Speaker impedance:
3” 4Ω 3 W
Speak power:
2W
Frequency response:
200 Hz-20 KHz
Distortion:
1 W 1 KHz ≤ 0.3%
Frequency range:
FM: 64-108 MHz AM: 522-1620 kHz
Dimensions:
100 (L) x 100 (W) x 100 (H) mm
Weight:
about 0.62 kg (Battery not include)
PRODUCT DISPOSAL
Attention should be drawn to the environmental aspects of battery disposal.
Don’t throw used batteries in dustbin. Please contact your retailer in order to protect
the environment. Electrical products should not be disposal of with household
waste. Please recycle where facilities exist.
GUARANTEE
This product is guaranteed against all manufacturing defects for 2 years from the
date of purchase. If the care advice and instructions contained in this manual are
not followed the guarantee will be automatically void.
For this guarantee to be valid, it is necessary to present the original receipt or
invoice. Industrias Masats S. L. U. exclusive importer.
