Daemyung Webgate Hybrid DVR Series, Руководство пользователя

Страница: 71 / 118

70
Authentification
There are a few ways to send email (No authentification, SMTP server authentification and TLS authentification.)
• No authentification: sends email to the recipient address without server authentification
• SMTP authentification: sends email to the recipient after SMTP server authentification. The recipient address
must support SMTP authentification
• TLS authentification : sends email to the recipient after TLS server authentification.
<Note>
If 2 step authentication is required by mail server, please follow the mail server’s policy.
FTP Configuration
The DVR sends 1 video image per event to a FTP server when an
event occurs.
<Note>
Since FTP just transmits an image, if there is no image system event, it is
not supported.
Server IP/URL
Enter the FTP server address to send image
user ID
Enter the relevant ID when asked for FTP server authentication.
password
enter FTP server password.
FTP Directory
Select Folder to save image If folder is not indicated, the image is sent to the folder which server selects
Motion detection
The Motion detection can be used to notify user
of detected motion on each channel or all channel.
Channel
Configure All or each channel.
Sensitivity
Sensitivity can be configured from min.1 to max 10.
Area
Area configure detection when a motion is triggered.
User can select all or clear all. In case of configuring each channel,
it is available to set all, clear all or define user area.Sensor
<Note>
To set the motion detection, please use webpage of IP camera.
menu

event

motion