background image

 

 

112 

 

THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT 

WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE 

THE PROGRAM “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, 

BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A 

PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS 

WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY 

SERVICING, REPAIR OR CORRECTION. 

16. Limitation of Liability. 

IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT 

HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS THE PROGRAM AS PERMITTED 

ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR 

CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING 

BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY 

YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), 

EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. 

17. Interpretation of Sections 15 and 16. 

If the disclaimer of warranty and limitation of liability provided above cannot be given local legal effect 

according to their terms, reviewing courts shall apply local law that most closely approximates an absolute 

waiver of all civil liability in connection with the Program, unless a warranty or assumption of liability 

accompanies a copy of the Program in return for a fee. 

END OF TERMS AND CONDITIONS 

How to Apply These Terms to Your New Programs 

If you develop a new program, and you want it to be of the greatest possible use to the public, the best 

way to achieve this is to make it free software which everyone can redistribute and change under these 

terms. 

To do so, attach the following notices to the program. It is safest to attach them to the start of each 

source file to most effectively state the exclusion of warranty; and each file should have at least the 

“copyright” line and a pointer to where the full notice is found. 

<one line to give the program's name and a brief idea of what it does.> 

Copyright (C) <year>    <name of author> 

This program is free software: you can redistribute it and/or modify 

it under the terms of the GNU General Public License as published by 

the Free Software Foundation, either version 3 of the License, or 

(at your option) any later version. 

This program is distributed in the hope that it will be useful, 

but WITHOUT ANY WARRANTY; without even the implied warranty of 

MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.   See the 

GNU General Public License for more details. 

You should have received a copy of the GNU General Public License 

along with this program.    If not, see <http://www.gnu.org/licenses/>. 

Also add information on how to contact you by electronic and paper mail. 

If the program does terminal interaction, make it output a short notice like this when it starts in an 

interactive mode: 

<program>    Copyright (C) <year>    <name of author> 

This program comes with ABSOLUTELY NO WARRANTY; for details type `show w'. 

This is free software, and you are welcome to redistribute it 

under certain conditions; type `show c' for details. 

The hypothetical commands `show w' and `show c' should show the appropriate parts of the General 

Public License. Of course, your program's commands might be different; for a GUI interface, you would 

use an “about box”. 

You should also get your employer (if you work as a programmer) or school, if any, to sign a “copyright 

disclaimer” for the program, if necessary. For more information on this, and how to apply and follow the 

GNU GPL, see <http://www.gnu.org/licenses/>. 

The GNU General Public License does not permit incorporating your program into proprietary programs. If 

your program is a subroutine library, you may consider it more useful to permit linking proprietary 

applications with the library. If this is what you want to do, use the GNU Lesser General Public License 

instead of this License. But first, please read <http://www.gnu.org/philosophy/why-not-lgpl.html>. 

GNU LESSER GENERAL PUBLIC LICENSE 

Version 2.1, February 1999   

Copyright (C) 1991, 1999 Free Software Foundation, Inc. 

51 Franklin Street, Fifth Floor, Boston, MA    02110-1301    USA 

Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is 

not allowed. 

[This is the first released version of the Lesser GPL.    It also counts as the successor of the GNU Library 

Public License, version 2, hence the version number 2.1.] 

Preamble 

The licenses for most software are designed to take away your freedom to share and change it. By 

contrast, the GNU General Public Licenses are intended to guarantee your freedom to share and change 

free software--to make sure the software is free for all its users.   

This license, the Lesser General Public License, applies to some specially designated software packages--

typically libraries--of the Free Software Foundation and other authors who decide to use it. You can use it 

too, but we suggest you first think carefully about whether this license or the ordinary General Public 

License is the better strategy to use in any particular case, based on the explanations below.   

When we speak of free software, we are referring to freedom of use, not price. Our General Public 

Licenses are designed to make sure that you have the freedom to distribute copies of free software (and 

charge for this service if you wish); that you receive source code or can get it if you want it; that you can 

change the software and use pieces of it in new free programs; and that you are informed that you can 

do these things.   

To protect your rights, we need to make restrictions that forbid distributors to deny you these rights or to 

ask you to surrender these rights. These restrictions translate to certain responsibilities for you if you 

distribute copies of the library or if you modify it.   

For example, if you distribute copies of the library, whether gratis or for a fee, you must give the 

recipients all the rights that we gave you. You must make sure that they, too, receive or can get the source 

code. If you link other code with the library, you must provide complete object files to the recipients, so 

that they can relink them with the library after making changes to the library and recompiling it. And you 

must show them these terms so they know their rights.   

We protect your rights with a two-step method: (1) we copyright the library, and (2) we offer you this 

license, which gives you legal permission to copy, distribute and/or modify the library.   

To protect each distributor, we want to make it very clear that there is no warranty for the free library. 

Also, if the library is modified by someone else and passed on, the recipients should know that what they 

have is not the original version, so that the original author's reputation will not be affected by problems 

that might be introduced by others.   

Finally, software patents pose a constant threat to the existence of any free program. We wish to make 

sure that a company cannot effectively restrict the users of a free program by obtaining a restrictive 

license from a patent holder. Therefore, we insist that any patent license obtained for a version of the 

library must be consistent with the full freedom of use specified in this license.   

Most GNU software, including some libraries, is covered by the ordinary GNU General Public License. This 

license, the GNU Lesser General Public License, applies to certain designated libraries, and is quite 

different from the ordinary General Public License. We use this license for certain libraries in order to 

permit linking those libraries into non-free programs.   

When a program is linked with a library, whether statically or using a shared library, the combination of 

the two is legally speaking a combined work, a derivative of the original library. The ordinary General 

Public License therefore permits such linking only if the entire combination fits its criteria of freedom. The 

Lesser General Public License permits more lax criteria for linking other code with the library.   

We call this license the "Lesser" General Public License because it does Less to protect the user's freedom 

than the ordinary General Public License. It also provides other free software developers Less of an 

advantage over competing non-free programs. These disadvantages are the reason we use the ordinary 

General Public License for many libraries. However, the Lesser license provides advantages in certain 

special circumstances.   

For example, on rare occasions, there may be a special need to encourage the widest possible use of a 

certain library, so that it becomes a de-facto standard. To achieve this, non-free programs must be 

allowed to use the library. A more frequent case is that a free library does the same job as widely used 

non-free libraries. In this case, there is little to gain by limiting the free library to free software only, so we 

use the Lesser General Public License.   

In other cases, permission to use a particular library in non-free programs enables a greater number of 

people to use a large body of free software. For example, permission to use the GNU C Library in non-

free programs enables many more people to use the whole GNU operating system, as well as its variant, 

the GNU/Linux operating system.   

Although the Lesser General Public License is Less protective of the users' freedom, it does ensure that the 

user of a program that is linked with the Library has the freedom and the wherewithal to run that 

program using a modified version of the Library.   

The precise terms and conditions for copying, distribution and modification follow. Pay close attention to 

the difference between a "work based on the library" and a "work that uses the library". The former 

contains code derived from the library, whereas the latter must be combined with the library in order to 

run.   

TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION 

0. This License Agreement applies to any software library or other program which contains a notice placed 

by the copyright holder or other authorized party saying it may be distributed under the terms of this 

Lesser General Public License (also called "this License"). Each licensee is addressed as "you".   

A "library" means a collection of software functions and/or data prepared so as to be conveniently linked 

with application programs (which use some of those functions and data) to form executables.   

The "Library", below, refers to any such software library or work which has been distributed under these 

terms. A "work based on the Library" means either the Library or any derivative work under copyright law: 

that is to say, a work containing the Library or a portion of it, either verbatim or with modifications and/or 

translated straightforwardly into another language. (Hereinafter, translation is included without limitation 

in the term "modification".)   

"Source code" for a work means the preferred form of the work for making modifications to it. For a 

library, complete source code means all the source code for all modules it contains, plus any associated 

interface definition files, plus the scripts used to control compilation and installation of the library.   

Activities other than copying, distribution and modification are not covered by this License; they are 

outside its scope. The act of running a program using the Library is not restricted, and output from such a 

program is covered only if its contents constitute a work based on the Library (independent of the use of 

the Library in a tool for writing it). Whether that is true depends on what the Library does and what the 

program that uses the Library does.   

1. You may copy and distribute verbatim copies of the Library's complete source code as you receive it, in 

any medium, provided that you conspicuously and appropriately publish on each copy an appropriate 

copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the 

absence of any warranty; and distribute a copy of this License along with the Library.   

You may charge a fee for the physical act of transferring a copy, and you may at your option offer 

warranty protection in exchange for a fee.   

2. You may modify your copy or copies of the Library or any portion of it, thus forming a work based on 

the Library, and copy and distribute such modifications or work under the terms of Section 1 above, 

provided that you also meet all of these conditions:   

a) The modified work must itself be a software library. 

b) You must cause the files modified to carry prominent notices stating that you changed the files and the 

date of any change. 

c) You must cause the whole of the work to be licensed at no charge to all third parties under the terms 

of this License. 

d) If a facility in the modified Library refers to a function or a table of data to be supplied by an 

application program that uses the facility, other than as an argument passed when the facility is invoked, 

then you must make a good faith effort to ensure that, in the event an application does not supply such 

function or table, the facility still operates, and performs whatever part of its purpose remains meaningful.   

(For example, a function in a library to compute square roots has a purpose that is entirely well-defined 

independent of the application. Therefore, Subsection 2d requires that any application-supplied function 

or table used by this function must be optional: if the application does not supply it, the square root 

function must still compute square roots.) 

These requirements apply to the modified work as a whole. If identifiable sections of that work are not 

derived from the Library, and can be reasonably considered independent and separate works in 

themselves, then this License, and its terms, do not apply to those sections when you distribute them as 

separate works. But when you distribute the same sections as part of a whole which is a work based on 

the Library, the distribution of the whole must be on the terms of this License, whose permissions for 

other licensees extend to the entire whole, and thus to each and every part regardless of who wrote it.   

Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by 

you; rather, the intent is to exercise the right to control the distribution of derivative or collective works 

based on the Library.   

In addition, mere aggregation of another work not based on the Library with the Library (or with a work 

based on the Library) on a volume of a storage or distribution medium does not bring the other work 

under the scope of this License.   

3. You may opt to apply the terms of the ordinary GNU General Public License instead of this License to a 

given copy of the Library. To do this, you must alter all the notices that refer to this License, so that they 

refer to the ordinary GNU General Public License, version 2, instead of to this License. (If a newer version 

than version 2 of the ordinary GNU General Public License has appeared, then you can specify that 

version instead if you wish.) Do not make any other change in these notices.   

Once this change is made in a given copy, it is irreversible for that copy, so the ordinary GNU General 

Public License applies to all subsequent copies and derivative works made from that copy.   

This option is useful when you wish to copy part of the code of the Library into a program that is not a 

library.   

4. You may copy and distribute the Library (or a portion or derivative of it, under Section 2) in object code 

or executable form under the terms of Sections 1 and 2 above provided that you accompany it with the 

complete corresponding machine-readable source code, which must be distributed under the terms of 

Sections 1 and 2 above on a medium customarily used for software interchange.   

If distribution of object code is made by offering access to copy from a designated place, then offering 

equivalent access to copy the source code from the same place satisfies the requirement to distribute the 

source code, even though third parties are not compelled to copy the source along with the object code.   

5. A program that contains no derivative of any portion of the Library, but is designed to work with the 

Library by being compiled or linked with it, is called a "work that uses the Library". Such a work, in 

isolation, is not a derivative work of the Library, and therefore falls outside the scope of this License.   

However, linking a "work that uses the Library" with the Library creates an executable that is a derivative 

of the Library (because it contains portions of the Library), rather than a "work that uses the library". The 

executable is therefore covered by this License. Section 6 states terms for distribution of such executables.   

When a "work that uses the Library" uses material from a header file that is part of the Library, the object 

code for the work may be a derivative work of the Library even though the source code is not. Whether 

this is true is especially significant if the work can be linked without the Library, or if the work is itself a 

library. The threshold for this to be true is not precisely defined by law.   

If such an object file uses only numerical parameters, data structure layouts and accessors, and small 

macros and small inline functions (ten lines or less in length), then the use of the object file is 

unrestricted, regardless of whether it is legally a derivative work. (Executables containing this object code 

plus portions of the Library will still fall under Section 6.)   

Otherwise, if the work is a derivative of the Library, you may distribute the object code for the work under 

the terms of Section 6. Any executables containing that work also fall under Section 6, whether or not 

they are linked directly with the Library itself.   

6. As an exception to the Sections above, you may also combine or link a "work that uses the Library" 

with the Library to produce a work containing portions of the Library, and distribute that work under 

terms of your choice, provided that the terms permit modification of the work for the customer's own use 

and reverse engineering for debugging such modifications.   

You must give prominent notice with each copy of the work that the Library is used in it and that the 

Library and its use are covered by this License. You must supply a copy of this License. If the work during 

execution displays copyright notices, you must include the copyright notice for the Library among them, 

as well as a reference directing the user to the copy of this License. Also, you must do one of these 

things:   

a) Accompany the work with the complete corresponding machine-readable source code for the Library 

including whatever changes were used in the work (which must be distributed under Sections 1 and 2 

above); and, if the work is an executable linked with the Library, with the complete machine-readable 

"work that uses the Library", as object code and/or source code, so that the user can modify the Library 

and then relink to produce a modified executable containing the modified Library. (It is understood that 

the user who changes the contents of definitions files in the Library will not necessarily be able to 

recompile the application to use the modified definitions.) 

b) Use a suitable shared library mechanism for linking with the Library. A suitable mechanism is one that 

(1) uses at run time a copy of the library already present on the user's computer system, rather than 

copying library functions into the executable, and (2) will operate properly with a modified version of the 

library, if the user installs one, as long as the modified version is interface-compatible with the version 

that the work was made with. 

c) Accompany the work with a written offer, valid for at least three years, to give the same user the 

materials specified in Subsection 6a, above, for a charge no more than the cost of performing this 

distribution. 

d) If distribution of the work is made by offering access to copy from a designated place, offer equivalent 

access to copy the above specified materials from the same place. 

e) Verify that the user has already received a copy of these materials or that you have already sent this 

user a copy. 

For an executable, the required form of the "work that uses the Library" must include any data and utility 

programs needed for reproducing the executable from it. However, as a special exception, the materials to 

be distributed need not include anything that is normally distributed (in either source or binary form) with 

the major components (compiler, kernel, and so on) of the operating system on which the executable 

runs, unless that component itself accompanies the executable.   

It may happen that this requirement contradicts the license restrictions of other proprietary libraries that 

do not normally accompany the operating system. Such a contradiction means you cannot use both them 

and the Library together in an executable that you distribute.   

7. You may place library facilities that are a work based on the Library side-by-side in a single library 

together with other library facilities not covered by this License, and distribute such a combined library, 

provided that the separate distribution of the work based on the Library and of the other library facilities 

is otherwise permitted, and provided that you do these two things:   

a) Accompany the combined library with a copy of the same work based on the Library, uncombined with 

any other library facilities. This must be distributed under the terms of the Sections above. 

b) Give prominent notice with the combined library of the fact that part of it is a work based on the 

Library, and explaining where to find the accompanying uncombined form of the same work. 

8. You may not copy, modify, sublicense, link with, or distribute the Library except as expressly provided 

under this License. Any attempt otherwise to copy, modify, sublicense, link with, or distribute the Library is 

void, and will automatically terminate your rights under this License. However, parties who have received 

copies, or rights, from you under this License will not have their licenses terminated so long as such 

parties remain in full compliance.   

9. You are not required to accept this License, since you have not signed it. However, nothing else grants 

you permission to modify or distribute the Library or its derivative works. These actions are prohibited by 

law if you do not accept this License. Therefore, by modifying or distributing the Library (or any work 

based on the Library), you indicate your acceptance of this License to do so, and all its terms and 

conditions for copying, distributing or modifying the Library or works based on it.   

10. Each time you redistribute the Library (or any work based on the Library), the recipient automatically 

receives a license from the original licensor to copy, distribute, link with or modify the Library subject to 

these terms and conditions. You may not impose any further restrictions on the recipients' exercise of the 

rights granted herein. You are not responsible for enforcing compliance by third parties with this License.   

11. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason 

(not limited to patent issues), conditions are imposed on you (whether by court order, agreement or 

otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of 

this License. If you cannot distribute so as to satisfy simultaneously your obligations under this License 

and any other pertinent obligations, then as a consequence you may not distribute the Library at all. For 

example, if a patent license would not permit royalty-free redistribution of the Library by all those who 

receive copies directly or indirectly through you, then the only way you could satisfy both it and this 

License would be to refrain entirely from distribution of the Library.   

If any portion of this section is held invalid or unenforceable under any particular circumstance, the 

balance of the section is intended to apply, and the section as a whole is intended to apply in other 

circumstances.   

It is not the purpose of this section to induce you to infringe any patents or other property right claims or 

to contest validity of any such claims; this section has the sole purpose of protecting the integrity of the 

free software distribution system which is implemented by public license practices. Many people have 

made generous contributions to the wide range of software distributed through that system in reliance on 

consistent application of that system; it is up to the author/donor to decide if he or she is willing to 

distribute software through any other system and a licensee cannot impose that choice.   

This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this 

License.   

12. If the distribution and/or use of the Library is restricted in certain countries either by patents or by 

copyrighted interfaces, the original copyright holder who places the Library under this License may add an 

Содержание Webgate Hybrid DVR Series























































































































Отзывы: