DAELIM ROADWIN VJ125 - SERVICE, Руководство по обслуживанию

Страница: 107 / 251

9-14
CYLINDER HEAD / VALVES
CAM SHAFT
CAM SHAFT CAM SHAFT
CAM SHAFT CAM SHAFT
CAM SHAFT CAM SHAFT CAM SHAFT CAM SHAFT CAM SHAFT CAM SHAFT CAM SHAFT
CAM SHAFT CAM SHAFT
CAM SHAFT CAM SHAFT CAM SHAFT
CAM SHAFT
DOWEL PINS
DOWEL PINS
DOWEL PINS DOWEL PINS
DOWEL PINS
DOWEL PINS DOWEL PINS DOWEL PINS DOWEL PINS DOWEL PINS
DOWEL PINS
DOWEL PINS DOWEL PINS
DOWEL PINS DOWEL PINS
DOWEL PINS
TIMING MARK
TIMING MARK TIMING MARK
TIMING MARK TIMING MARK
TIMING MARK TIMING MARK TIMING MARK TIMING MARK TIMING MARK
TIMING MARK TIMING MARK
TIMING MARK TIMING MARK
TIMING MARK
TIMING MARK
NUTS
NUTS NUTS
NUTS
NUTS NUTS
NUTS NUTS NUTS
NUTS NUTS
NUTS
NUTS NUTS NUTS
NUTS
CYLINDER HEAD BOLT
CYLINDER HEAD BOLT CYLINDER HEAD BOLT
CYLINDER HEAD BOLT CYLINDER HEAD BOLT
CYLINDER HEAD BOLT CYLINDER HEAD BOLT CYLINDER HEAD BOLT CYLINDER HEAD BOLT CYLINDER HEAD BOLT
CYLINDER HEAD BOLT CYLINDER HEAD BOLT
CYLINDER HEAD BOLT CYLINDER HEAD BOLT
CYLINDER HEAD BOLT
CYLINDER HEAD BOLT
●
Install the camshaft holder.
●
Apply engine oil to the threaded part; install the
camshaft holder nut and bolts, and tighten them
driving with 2 - 3 times.
TORQUE : 2.0 kgf · · m (20N · · m)
●
Tighten the cylinder head bolt.
●
Remove the pan screws and seals from the cam chain
tensioner lifter.
● Rotate the tensioner shaft clockwise with a small
driver, and insert the shaft into the body completely.
●
Slowly rotate the crankshaft counterclockwise, and
align the
“ T ” mark of the flywheel with the index
mark of the LH. crankcase cover.
●
Apply engine oil to the camshaft, and install it on the
cylinder head with the cam thread facing downward.
●
Assemble the cam chain and cam sprocket after
matching the cam sprocket timing mark in parallel
with the top of the cylinder head.
● Install the dowel pins on the cylinder head.
Take precautions not to allow the cam chain to come
off the camshaft timing gear while turning the
camshaft.
·
The hole of the camshaft holder and the fitting section
of the rocker arm shaft fit section must be in
alignment.
·
Of IN and EX, the shorter rocker arm should be
installed on the IN side.
·
If the cam chain tensioner lifter is dropped, the shaft
will advance by the spring force.