DAELIM Roadwin R, Руководство по обслуживанию

Страница: 156 / 295

11-4
CYLINDER / PISTON
Insert the piston ring squarely into the bottom of the
cylinder, check the piston ring clearance.
- Service limit Top/second: 0.5mm
O/L Ring : 1.10mm .
Measure and record the piston outer diameter 90 to the
piston pin bore and at the point specified (10mm), near
the bottom of the piston skirt.
Replace the piston if the service limit is exceeded.
SERVICE LIMIT : 56.35 mm
PISTON PIN INSPECTION
Measure the piston pin bore inner diameter in an X and
Y axis. Take the maximum reading to determine the
inner diameter replace the piston if the inner diameter
is over the service limit.
SERVICE LIMIT : 15.040 mm
Measure the piston pin outer diameter at three points.
Replace the piston pin if the service limit is exceeded.
SERVICE LIMIT : 14.960 mm
Calculate the piston pin-to-pin bore clearance by
subtracting the piston pin outer diameter from the pin
bore inner diameter.
SERVICE LIMIT : 0.020 mm
SMALL END BEARING SURFACE INSPECTION
Measure the inner dismeter of the connecting rod small
end.
SERVICE LIMIT : 15.06 mm
Calculate the connecting rod small end-to-piston pin
clearance.
SERVICE LIMIT : 0.04 mm
PISTON RING
PISTON RING PISTON RING PISTON RING PISTON RING
PISTON RING PISTON RING
PISTON RING PISTON RING PISTON RING PISTON RING PISTON RING PISTON RING PISTON RING
PISTON RING PISTON RING
PISTON RING PISTON RING PISTON RING PISTON RING PISTON RING
PISTON RING
CYLINDER GAUGE
FEELER GAUGE
FEELER GAUGE
FEELER GAUGE FEELER GAUGE FEELER GAUGE
FEELER GAUGE FEELER GAUGE FEELER GAUGE
FEELER GAUGE FEELER GAUGE FEELER GAUGE FEELER GAUGE FEELER GAUGE
FEELER GAUGE FEELER GAUGE FEELER GAUGE
FEELER GAUGE FEELER GAUGE FEELER GAUGE
FEELER GAUGE FEELER GAUGE
FEELER GAUGE
Push the rings into the cylinder with the top of the
piston to be sure they are squarely in the cylinder.