DAELIM Roadwin R, Руководство по обслуживанию

Страница: 141 / 295

10-3
CYLINDER HEAD / VALVES
CAMSHAFT
REMOVAL
Remove the noise suppressor cap assembly from
the spark plug.
Remove the side cowl.
Remove the fuel tank.
Remove the cylinder head cover bolts and cover.
Remove the AC generator cap and crank shaft hole
cap out of the left crankcase cover.
Turn the crankshaft to the left, and align the T mark
of the flywheel with the index mark of the LH.
crankcase cover.
Verify that the piston is located at the top dead center.
(Make all camshaft lobes face downward.)
If all camshaft lobes face upward, rotate the crankshaft
to the left for 1 turn (180 ), and align the T mark
with the index mark once again.
Loosen the cam chain tensioner screw.
Remove the tensioner mounting bolt and tensioner
lifter.
Remove the camshaft holder 6mm 8 flange bolts
and remove the camshaft holder from the
cylinderhead.
Remove the cam chain from the camshaft.
Remove the camshaft.
Take precautions not to allow the cam chain to drop
into the crankcase.