DAEKYUNG TECH & TESTERS Mfg. CO.,LTD
- 9 -
◉
← → : Adjust digit numbers
◉
↑ ↓ : Adjust selected digit numbers
◉
Enter : Confirm
◉
Reset : Cancel
◉
← → : Adjust digit numbers
◉
↑ ↓ : Adjust selected digit numbers
◉
Enter : Confirm
◉
Reset : Cancel
5.9.14 Debug Mode Non (
E.Debug Mode:Print of the system status
)
: (Inhibition of use),
Initial setting value Non
5.9.15 Exit (
F. Exit
) : Exit the Manu
5.10
∅
Function
5.10.1 R. Cylinderical: Enter a radius (R) value for a cylinder-shaped specimen.
1) Initial value: R = 0.00 mm
2) ex) Enter a radius value, R10, when the specimen has the radius of Ø
Press the Enter key after setting as R = 10.00 by using the Up/Down/Left/Right arrow keys (↑,↓,←,→)
3) Maximum input range: R = 19.99 mm
5.10.2 D Spherical: Enter a diameter (Ø) value for a spherical-shaped specimen.
1) Initial Value: D = 0.00 mm
2) Ex) Enter a diameter value, Ø 20, when the specimen has the diameter of Ø 20.
Press the Enter key after setting as D = 20.00 by using the Up/Down/Left/Right arrow keys (↑,↓,←,→)
3) Maximum input range: D = 25.99 mm
5.10.3 Exit : Exit the menu.
5.11 Others
5.11.1 If R is entered, D is set as Ø. If D is entered, R is set as Ø. At this
time, only one of the above cases is valid.
