DAEKYUNG TECH & TESTERS Mfg. CO.,LTD
- 4 -
1. Product Overview
This tester is easy to use and supports high accuracy. Its
operating principle is to measure by using the depth difference
of the test traces caused by the initial load and the test load.
At this time, 10 kgf is applied to the initial load, and the test
load is determined by increasing the load. This Rockwell
hardness tester can measure even nonmetal materials like
plastics as well as soft/hard metal materials.
2. Features
2.1 The tester uses the automatic motor operation method that
has no personal error while measuring.
2.2 The indicating lamp turns on during the test. It is easy to
construct a test environment.
2.3 The load hold time can be controlled directly.
2.4 Relatively soft/hard materials can be measured exactly.
2.5 The hardness value is displayed in the digital display part to
enable reading the value directly.
2.6 Test trace remains fine, and it does not influence the product test.
2.6 Measurement range is wide.
3. Specifications
3.1 Load
3.1.1 Standard Load: 10 kgf
