DAEKYUNG TECH & TESTERS Mfg. CO.,LTD
- 6 -
HRC, HRA, HRB, HRD
HRE, HRF, HRG, HRH
HRK, HRL, HRM, HRP
HRR, HRS, HRV
◉
USE ↑ ↓ ← →
◉
ENTER : Close after Setting
◉
RESET : Exit
Ex) Enter after selecting HRC
5. Names and Functions of Digital Display Part
5.1
Selected Balance Weight
5.2 Selected Hardness Unit and Cone Display
①
5.3 Strain Display
②
5.4 Display of normal test standby or dead selection error
③
5.5 MENU : All Menu Setting
④
5.6
∅
: Input of Spherical or Cylinder Shape Specimen Size
5.7 Reset: GAUGE Zero Setting
5.8 Enter, A rro w : B uttons for M enu M ode
⑧ ⑤ ⑥ ⑦ ⑧
5.9 Manu ⑤ Function
5.9.1 Scale (
SCALE
): Change and Setting of Hardness Unit
5.9.2 Load Maintenance (
D. Load Sec
): Load applying time by the dead weight
1) Set by using the Up/Down (↑,↓) arrow keys. (Increase/decrease second by second)
2) Press the Enter key after setting.
5.9.3 Reading Standby (
D. Read Sec
): Set the standby time before reading
1) Set by using the Up/Down (↑,↓) arrow keys. (Increase/decrease second by second)
2) Press the Enter key after setting.
5.9.4 Minimum HRC/0.0 (
miN HRC 0.0
): Error message when out-of-minimum tolerance
1) S et by using the U p/D ow n/Left/Right arrow (↑,↓,←,→) keys.
2) Press the Enter key after setting. (Initial Value: 0.0 miN)
