DAEKYUNG TECH & TESTERS Mfg. CO.,LTD
- 8 -
3) For OnA
① When pressing the right arrow key (▶):
The current hardness value is printed (one time):
Test Number : (Manual input of Test No.
)
Test Date : (Manual input of test date)
Operator : (Manual input of test operator)
Specimen : (Manual input of specimen mark)
Remarks : (Manual input of remarks)
001 : HRC 099.30 (Test Count: Print of Hardness value)
② When pressing the left arrow key (◀):
The currently measured hardness value is printed:
Test Number : (Manual input of test No.)
Test Date : (Manual input of test date)
Operator : (Manual input of test operator)
Specimen : (Manual input of specimen mark)
Remarks : (Manual input of remarks)
001 : HRC 099.30 (Test Count: Print of Hardness value)
002 : HRC 099.30 (Test Count: Print of Hardness value)
Total No : 002 (Print of total test counts)
Avr Value : 098.30 (Print of total hardness mean value)
S.D Value : 000.30 (Print of total standard deviation)
5.9.12 Backlight (
C. Back-Light):
Setting of backlight (unit: sec.) – Up to 200 sec can be selected.
5.9.13 Calibration Mode (
D.Calibration OFF/C-1,C-2
): Calibration mode (1: Indirect, 2: Direct),
Set as Off usually.
