Daedong DSC62, Руководство пользователя

Страница: 83 / 184

HARVESTING INSTRUCTION
7-7
7
1. Do not engage the threshing
clutch when the engine slowly
rotates. It may cause blockage
or other troubles in the thresh-
ing unit.
2. Please operate slowly and safe-
ly when harvesting a small field
or at a corner of a field.
3. When shifting between the cut-
ter and dropper, please stop the
threshing unit first.
4. Before any operation, brush
the dust screens. Dust clog can
cause an overheating engine.
If you find too much dust on the
screens during operation, turn off
the engine and clean the screens.
7. On a concrete bank field or
levee, do not attempt any
sharp turning or put the
crawlers on it. Crawlers
may be broken or derailed.
8. W h e n c r o s s i n g o v e r a
bump, the combines may
tilt abruptly. You should
slow down.
9. Do not park the combine on
a straw-covered surface. If
the straws contact with the
muffler, the combine may
catch fire.
10.The buildup of chaff and
crop debris in the engine
compartment, on the en -
gine, on the exhaust sys -
tem, in the threshing unit,
on the battery cover, and in
the cutter is a fire hazard.
Remove the buildup fre -
quently.
CAUTION
CAUTION DURING OPERA-
TION
(1) Power Steering Lever
(A) Up (B) Down (C) About 2 cm
OPERATION OF THE REAP-
ING UNIT
417O713A
ADjUSTING THE CUTTING
HEIGHT
1. Lift the divider to some extent
using the power steering lever
not to contact with ground.
2. Usually the distance between
the divider and ground should
be 2 cm.
3. If you reap long rice or wheat, or
a plenty of weeds are present,
adjust the cutting height slightly
higher.
DSC62-영문판-7장.indd 7 2012-04-17 오후 4:56:19