Daedong DSC62, Руководство пользователя

Страница: 170 / 184

10-6 DSC6
Reference Troubleshooting

Adjust the tension

Adjust position of ear to be located at the
FEEDING-DEPTH INDICATING lAbEl on
the thresher inlet by the feeding depth con-
trol switch

Shift the elevator and the auxiliary levers

Adjusting the slide rails on the elevator frame

Normally engage the lever to STANDARD

However, when reaping slowly (0.1~ 0. m/s)
near a field bank or crop roots are pulled
out, shift the lever to SlOW
Checking point
Chain tension
Conveyor-belt

Feeding depth control
lever (automatic)

Manual feeding depth
control switch (manual)
Elevator shift lever
Auxiliary shift lever
Slide rail
Auxiliary shift lever
The feeding conveyor fails To convey crops or crops are unevenly conveyed
Immediate actions

Stop reaping and
disengage the reap-
ing clutch lever

Stop the engine
Cause
The chain or conveyor belt is
loose
The feeding depth control is
not proper
Crop are unevenly elevated
by the elevator unit
At a low speed, crops are
unevenly conveyed
Reference Troubleshooting

Replace it with new one

Adjust position of the ear end to be located
at the FEEDINGDEPTH-INDICATING
lAbEl in the thresher inlet by the feeding
depth control switch

Adjust clearance

Remove the straw

Replace the cutting blade
Checking point
Cutting blade

Feeding depth control
unit (automatic)

Manual feeding depth
switch (manual)

C l e a r a n c e b e t w e e n
blades

The gap between cutting
blades

Cutting blades
lengTh of sTraws cuT by The sTraw cuTTer bar becomes long
Immediate actions

Stop the reaping
and the engine
Cause
The cutting blade is broken
The feeding depth is too
deep
Clearance between blades is
too wide
Straw is stuffed between the
cutting blades
Cutting blade is worn out
DSC62-영문판-10장.indd 6 2012-04-16 오후 6:26:09