Daedong DSC62 Скачать руководство пользователя страница 20

Страница: 20 / 184

1-10

DSC62

for long term storage, discon-

nect the (-) lead wire or re-

move the battery.
first depress the parking

brake pedal. then, engage

the brake lock.
put chocks in front of and be-

hind the wheels. then, release

the parking brake.
to dispose some parts (the

battery or used oil) or the

whole combine, please contact

a dealer.

•

417O120A

417O119A

Clean the exterior with

water, then power off the

engine on a level ground;

press down the parking

brake and pull out the igni-

tion key.

1. Inject oil into all operating

parts during long-term stor-

age.

•

CAUTION

When disconnecting the

battery cables, always dis-

connect the battery ground

(-) cable first from the bat-

tery. When connect the ca-

bles, connect the (+) cable

first.

•

WARNING

DSC62-영문판-1장.indd 10

2012-04-17 오전 10:20:19

Содержание DSC62

























































































































































































Результаты поиска

Содержание DSC62

Отзывы:

Daedong DSC62, Руководство пользователя, Страница: 20 / 184

Результаты поиска

Содержание DSC62

Отзывы: