Dacor RNHP36 Renaissance, Руководство по установке

Страница: 16 / 33

14
The blowers (also called fans) can be rotated so that the air
is vented out the back of the hood.
If the hood will be installed in a top exhaust configuration,
your hood is already in the default top exhaust position.
If the hood will be installed in a
rear exhaust
configuration,
the blowers must be rotated so the exhaust vents through
the rear of the hood and to the outside.
This must be done before hanging the hood .
Top Exhaust
Rear
Exhaust
Rotating the Blower(s) for Rear Exhaust
WARNING
• Do not install the range hood unless the electrical service provided meets the range hood specifications.
• Observe all governing codes and ordinances during installation. Contact your local building department for further
information.
• A qualified technician must complete the installation of this built-in appliance. More than one person is required to
raise the hood into place. The owner is responsible to make sure the hood is properly installed.
Tools Needed
5/16” Nut driver Phillips screwdriver
Cable ties
AHT10 Transition Kit
(optional) plus metal
screws and foil tape
10” Ducts and
ducting materials
8” Duct and
ducting materials
Installation Instructions