background image

Page 2

Grill Cart Installation Instructions Kit

ASSEMBLY:

Step 1: 

    Remove the outdoor grill from its shipping carton and 

pallet. Remove the parts box to lighten the appliance.

Step 2: 

Set the cart in an open location and lock the wheels 

on the cart to minimize potential movement.

Step 3: 

    Remove the drawers.

Step 4: 

As you place the outdoor grill on the cart, feed the 

electrical cord into the utility cut-out on the cart.

Step 5: 

    Center the unit on the cart, making sure to line up the 

threaded mounting holes under the bottom of the grill 

with the holes in the top of the cart.

Step 6: 

Thread both of the supplied bolts into the bottom of 

the outdoor grill from inside the cart. Tighten the bolts 

into place.

Step 7: 

    Install the side shelves if desired. See next page.

Step 8: 

Before installing the front drawers and tank shelf, con-

nect the regulator and gas supply line according to the 

Outdoor Grill Installation Instructions

.

Step 9: 

    Install the drawers. Put the LP tank on the tank shelf 

and connect it, if applicable.

Step 10: 

Turn on the gas and check for leaks according to the 

Outdoor Grill Installation Instruc-

tions

.

Step 11: 

    Connect a three-prong extension cord (minimum 5 Amp. capacity) to the power input on 

the back of the cart. Connect the extension cord to a grounded, three-prong, electrical 

outlet.

CAUTION:

The largest recommended LP tank size for the rollout tank shelf 

is five gallons.

WARNING:

•  The grill cart is equipped with a grounded three-wire electrical system 

and ground fault interrupter (GFI) electrical outlets for safety. To avoid 

an electric shock hazard:

•  Connect the power cords from the outdoor grill, rotisserie motor and 

optional warming oven only to the electrical outlets mounted on the cart.

•  Do not under any circumstances:

- Cut or remove the third (ground) prong from the appliance(s)  

  and rotisserie power cords.
- Do not use an adapter plug.
- Do not use an extension cord.
- Do not use a power cord that is frayed or damaged.

Bolt locations

Utility 

cutout

Swiveling 

wheel

Tank 

shelf

Locking wheels

Отзывы: