28 English
Ins
tallation ins
truc
tions
Installation instructions
Locking screw
5.
Loose Locking screw of Broil Burner
and, adjust air shutter.
Adjustment air shutter (Bake Burner)
1.
Remove 2 screws of Cavity Floor and
remove Cavity Floor.
2.
Remove 2 screws of Bracket Base and
remove Bracket Base.
3.
Loose Locking screw of Bake Burner
and, adjust air shutter.
Locking screw
To adjust the shutter, loosen the locking
screw and rotate the shutter towards the
open or closed position as needed. If flames
are lifting off the burner ports, gradually
reduce the air shutter opening until the
flames are stabilized.
If flames are too yellow and/or too large,
gradually increase the air shutter opening
until the flames have approximately a 1 in
blue cone.
NOTE
If the range is set up for natural gas, the
flames should burn with minimal yellow
tipping. If the range is set up for LP gas,
small yellow tips at the end of the cones are
normal.
Locking screw
After the flames are adjusted properly, shut
off the oven, retighten the locking screws,
replace the oven bottom and racks, and
close the oven door.
INSTALL_DOP30T840GS_DA_DG68-01456A-00_EN.indd 28
INSTALL_DOP30T840GS_DA_DG68-01456A-00_EN.indd 28
2022-10-06 오후 6:52:01
2022-10-06 오후 6:52:01
