English 27
Ins
tallation ins
truc
tions
Adjusting the oven burner air adjustment shutters
Air adjustment
shutter
Air adjustment
shutter
All oven burners have an air adjustment shutter. The purpose of the shutter is
to regulate the flow of air to the flames. Properly adjusted flames should burn
steadily with approximately 1 in of blue cone. The flames should never extend
past the edge of the burner baffles. Even though these are preset at the factory,
they should be checked and, if needed, adjusted periodically to ensure efficient
operation.
To check and adjust the oven burner air adjustment shutters:
1.
Open the oven door.
2.
Remove the oven racks.
3.
Remove the oven floor.
4.
Turn the mode selector knob from
OFF
to the
Bake
position, and then rotate
the temperature selector knob to set the temperature from the
OFF
position.
5.
After the oven has lit, visually check the flames coming out of the upper and
lower burners. If adjustment is needed, carefully adjust the air adjustment
shutters.
The shutters are located at the base of the burner manifolds near the back oven
wall.
Adjustment air shutter (Broil Burner)
1.
Remove 1 screw of Bracket-Sub and,
remove Bracket Sub.
A
B
2.
Remove 1 screw (
A
) of Broil Burner.
3.
Remove 4 screws (
B
) of Bracket Broil.
4.
Separate Bracket Broil & Broil Burner.
INSTALL_DOP30T840GS_DA_DG68-01456A-00_EN.indd 27
INSTALL_DOP30T840GS_DA_DG68-01456A-00_EN.indd 27
2022-10-06 오후 6:52:01
2022-10-06 오후 6:52:01
