Dacor Distinctive DTHP30, Руководство по установке

Страница: 25 / 32

23
Verifying the Setup
Verify the setup to ensure everything functions correctly.
1. Turn the power ON at the circuit panel or fuse box.
2. Assemble the filters if not already done so.
3. Insert the filters gently:
Be careful not to scratch the back of the grease
channel!
• Raise the front edge into the filter clip, and press
forward.
• Lift the rear edge up and above the grease channel.
Use caution not to scratch the filter against the grease
channel or scratch other parts of the hood or filters.
• Set the rear edge onto the grease channel.
4. Turn the
LIGHTS knob. Twist the knob half-way around
for the lights to illuminate.
5. Turn the LIGHTS knob in the opposite direction to turn
the lights off.
6. Turn the FAN knob. The fan(s) will start at maximum
speed and decrease as you continue.
7. Turn the FAN knob in the opposite direction to turn the
fan(s) off.
If the Hood Fails to Function Correctly:
1. Verify that power is supplied to the hood via the outlet,
circuit breaker, or another main power source.
2. Make sure the electrical supply has not been disrupted
by a blown fuse or problems in the outlet or service.
3. Check the electrical connections to ensure that the
wiring installation has been completed correctly.
4. Repeat the above steps.
• If the hood still does not work, contact Dacor Distinctive
Service at (800) 793-0093 ex. 2822.
• Do not attempt to repair the appliance yourself.
• Dacor is not responsible for service required to correct
a faulty installation.
Installation Instructions
Control Panel
Filter
FAN
button
LIGHTS
button
Location of Filter Clips
Control Panel
Detail of
filter clip
Grease channel
FRONT
FRONT
FRONT
REAR
Replacement Part Number Replacement Part Description
702586 Mesh Style Filter (1 fully assembled filter)