Dacor Distinctive DTHP30, Руководство по установке

Страница: 19 / 32

17
Installation Instructions
Step 14
Cable I/O port
Back of Hood
Top of Hood
Detail: Location of Cable I/O Port
Rotating the Fan(s) for Rear Exhaust
Orientating the Blower(s)
It is imperative that the fan(s) are installed in the correct
orientation.
To do this, make sure the
cable I/O port is against the
back of the hood. Confirm the orientation is correct by
comparing it with the figures on the right.
11. Lay the fan over the exit vent with this specific
placement:
When facing the inside of the hood,
• The cable I/O port must be on the right , and
• The cable I/O port must be against the
back
of
the hood.
Steps 11-13
Finalizing the Rear Vent Setup
12. Refasten the cable clamps and cable assembly to the
hood.
13. Connect the cable assembly to the I/O port.
14. Attach the duct collars to the back of the hood.
15. Place the hood in a safe, upright position.
Cable Clamp