Dacor Distinctive DTHP30, Руководство по установке

Страница: 20 / 32

18
Installation Instructions
Four (4) corners are bent backward 90 degrees.
Using the Dual to Single
Transition Kit# AHT10
On dual exhaust models, the two 8-inch duct exhausts can
be transitioned into one 10-inch duct.
Assemble the Dacor transition kit # AHT10
before hanging
the hood. This transition kit fits over the top or rear ventila-
tion exits.
IMPORTANT:
DTHP3010, 3610, 4810 models
CANNOT vent through the rear ducts.
Bending the Flange for:
• Rear Vent Configuration
On models 3018, 3618, 4818
• Notes: 18” hood height requirement
Bending the Flange for:
• Top Vent Configuration
On models 3010, 3610, 4810
3018, 3618, 4818
32”
(81.3 cm)
13 3/4”
(34.9 cm)
3/4”
(1.9 cm)
9”
(22.9 cm)
2” (5.1 cm)
Four (4) corners are bent backward 90 degrees.
Preparing the AHT10
1. Create a lip around the transition kit by bending the
bottom edges backward at right angles to create a 3/4”
flange around the base.
DTHP3010, 3610, 4810
X