Dacor Distinctive DTHP30, Руководство по установке

Страница: 16 / 32

14
The 18-inch hoods have fan(s) that can be rotated so that
the air is vented out the back of the hood.
If the hood will be installed in a top exhaust A configura-
tion your hood is already in the factory default, top exhaust
position.
If the hood will be installed in a
rear exhaust B configura-
tion, the fans must be rotated so the exhaust vents through
the rear of the hood and to the outside.
This must be done before hanging the hood .
Top Exhaust
Rear
Exhaust
Rotating the Fan(s) for Rear Exhaust
WARNING
• Do not install the range hood unless the electrical service provided meets the range hood specifications.
• Observe all governing codes and ordinances during installation. Contact your local building department for further
information.
• A qualified technician must complete the installation of this built-in appliance. More than one person is required to
raise the hood into place. The owner is responsible to make sure the hood is properly installed.
Tools and Hardware Needed
5/16” Nut driver Phillips screwdriver
Cable ties
AHT10 Transition Kit
(optional) plus metal
screws and foil tape
10” Ducts and
ducting materials
8” Duct and
ducting materials
Installation Instructions
DTHP Models with Fan Rotation:
3018, 3618, 4818
A
B