DAB DRENAG, Инструкция по установке и обслуживанию

Страница: 19 / 152

ENGLISH
17
CONTENTS pag.
1. GENERAL 17
2. APPLICATIONS 18
3. PUMPED FLUIDS
18
4. TECHNICAL DATA AND RANGE OF USE 18
4.1. Materials 18
5. MANAGEMENT 18
5.1. Storage 18
5.2. Transport
19
5.3. Dimensions and weights 19
6. WARNINGS 19
6.1. Skilled personnel
19
6.2. Safety 19
6.3. Responsibility 19
7. INSTALLATION
19
8. ELECTRICAL CONNECTION 20
9. CHECKING THE DIRECTION OF ROTATION (for three-phase motors) 22
10. MAINTENANCE AND CLEANING
22
10.1. Checking and changing the impeller 22
10.1.1 Drenag 22
10.1.2 Feka 22
10.1.3 Grinder 22
10.2. Checking and changing the grinding device on Grinder electropumps 23
10.3. Checking and changing the seal oil 23
10.3.1 Checking the seal oil 23
10.3.2 Changing the seal oil 23
10.4. Checking and changing the mechanical seal 23
10.4.1 Checking the mechanical seal 23
10.4.2 Changing the mechanical seal 23
10.5. Resetting clearance
23
10.5.1 Drenag 23
10.5.2 Grinder 23
11. MODIFICATIONS AND SPARE PARTS 24
12. TROUBLESHOOTING 24
13. DIMENSIONS
139
14. EXAMPLES OF INSTALLATION 140
15. EXPLODED VIEWS 141
1. GENERAL
Read this documentation carefully before installation. Installation and functioning must comply with the
safety regulations in force in the country in which the product is installed. The entire operation must be carried
out in a workmanlike manner, exclusively by skilled personnel (paragraph 6.1), in possession of the technical
qualifications indicated by the standards in force. Failure to comply with the safety regulations not only causes
risk to personal safety and damage to the equipment, but invalidates every right to assistance under guarantee.
Keep this manual with care for future consultation even after the first installation.
The pump must not be allowed to operate outside the limit values for flow rate, pressure, rotation speed and temperature
indicated on the electric data plate or in this manual. The electric supply values indicated on the electric data plate must be
strictly respected.
These pumps cannot be used in swimming pools, ponds or tanks in which people or
present, or for pumping hydrocarbons (petrol, diesel fuel, fuel oils, solvents, etc.) in
accordance with the accident-prevention regulations in force.
N.B.:
the technical data plate inside the plastic envelope attached to the power cable shows the same data as the plate rivetted
onto the motor cover; it is supplied in this way so that the user can attach it to the electric power supply panel. The type of
pump and its characteristics can thus be identified without having to remove the pump from its place of installation.