ENGLISH
26
8. ACTIVE SYSTEM KIT ASSEMBLY.
The ACTIVE SYSTEM Kit can be fitted exclusively on new Dab products,
single-phase, with voltage 220/240 V – 50/60 Hz.
No kind of adaptation or modification can be made to the Kit to allow it to be
fitted on the pump.
Otherwise, tampering will invalidate every right to assistance under guarantee.
8.1 Pumps suitable for fitting the ACTIVE SYSTEM Kit .
JET JETINOX JETCOM
*EURO *EUROINOX *EUROCOM
Jet 62 M
Jetinox 62 M
Jetcom 62 M
Euro 25/30 M Euroinox 25/30 M Eurocom 25/30 M
Jet 82 M
Jetinox 82 M
Jetcom 82 M
Euro 30/30 M Euroinox 30/30 M Eurocom 30/30 M
Jet 92 M
Jetinox 92 M
Jetcom 92 M
Euro 40/30 M Euroinox 40/30 M Eurocom 30/50 M
Jet 102 M Jetinox 102 M Jetcom 102 M
Euro 30/50 M Euroinox 30/50 M Eurocom 40/50 M
Jet 112 M Jetinox 112 M
Euro 40/50 M Euroinox 40/50 M
Jet 132 M Jetinox 132 M Jetcom 132 M
Euro 50/50 M Euroinox 50/50 M
Euro 25/80 M Euroinox 25/80 M Eurocom 25/80 M
Euro 30/80 M Euroinox 30/80 M Eurocom 30/80 M
Euro 40/80 M Euroinox 40/80 M
*Only for Euro/Euroinox/Eurocom Pumps
produced as from MAY 2003
8.2. Instructions for assembly of the ACTIVE SYSTEM Kit .
To assemble the ACTIVE SYSTEM Kit
CAREFULLY
follow the instructions on page 109 fig.15.
It is recommended to recover the data plate of the pump on which the Active System kit is fitted.
It is also important to mark the name of the pump on the data plate of the Active System kit in the reserved
space “PUMP TYPE”, as indicated in figure 13.
Fig. 13
Cod.
t
h tt
MADE IN ITALY
TF 40
A max
IP
PN max bar
PUMP TYPE
............................
JET 62
