10
INSTALLING/CHANGING BATTERIES
Transmitter Battery
1. Push down on the Battery Compartment cover where
it is marked “PUSH” and slide it down in the direction
of the marked arrow.
2. Remove the old battery if present.
3. Install new 9V battery with ‘-’ terminal
on left and ‘+’ terminal on right.
4. Slide the Battery Compartment cover
back into place until it clicks.
Collar Battery
1. Use a thick coin to unscrew the Battery Compartment
Cap from the Collar Receiver.
2. Remove the old battery if present.
3. Insert new 6V battery into the
Battery Compartment with the ‘+’
end in first.
4. Screw the Battery Compartment Cap back into place
with coin. Be sure the cap is securely and properly in
place. If the cap is not screwed on tight enough or
improperly aligned, the Collar Receiver may not be
waterproof.
NOTE
A Lithium version of the 6V battery may last longer in your
Collar Receiver. Lithium batteries are designed for high-
drain electronics like your remote collar trainer.
