13
TESTING
To Test the Electronic Stimulation:
1. Place the tester firmly on the contacts
of the Collar Receiver.
2. Set the intensity (note - an intensity
level setting of 4 or less might not be
enough to light the tester).
3. Push the ‘Cont.’ button.
4. The tester light will light repeatedly when the
Continuous Stimulation button is pushed (the test light
will be brighter at higher intensity levels).
To Test the Beep:
1. Press the ‘Beep’ button.
2. An audible beep will be emitted any time the button is
pressed.
NOTE:
Turn the Collar Receiver ON for Testing
NOTE:
If the Collar Receiver is not responding to any sig-
nals from the Transmitter, the Collar Receiver may need to
be reprogrammed to the Transmitter (see
page 14
).
