D-Link xStack DGS-3120 Series, Справочное руководство CLI

Страница: 323 / 1150

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
318
Chapter 26 DHCP Server Command List
(RI Mode Only)
create dhcp excluded_address begin_address <ipaddr> end_address <ipaddr>
delete dhcp excluded_address [begin_address <ipaddr> end_address <ipaddr> | all]
show dhcp excluded_address
create dhcp pool
<pool_name 12>
delete dhcp pool [<pool_name 12> | all]
config dhcp pool network_addr <pool_name 12> <network_address>
config dhcp pool domain_name <pool_name 12> {<domain_name 64>}
config dhcp pool dns_server <pool_name 12> {< ipaddr> {< ipaddr> {< ipaddr>}}}
config dhcp pool netbios_name_server <pool_name 12> {< ipaddr> {< ipaddr> {< ipaddr>}}}
config dhcp pool netbios_node_type <pool_name 12> [broadcast | peer_to_peer | mixed |
hybrid]
config dhcp pool default_router <pool_name 12> {< ipaddr> {< ipaddr> {< ipaddr>}}}
config dhcp pool lease <pool_name 12> [<day 0-365> <hour 0-23> <minute 0-59> | infinite]
config dhcp pool boot_file <pool_name 12> {<file_name 64>}
config dhcp pool next_server <pool_name 12> {<ipaddr>}
config dhcp ping_packets <number 0-10>
config dhcp ping_timeout <millisecond 10-2000>
create dhcp pool manual_binding <pool_name 12> < ipaddr> hardware_address <macaddr>
{type [ethernet | ieee802]}
delete dhcp pool manual_binding <pool_name 12> [<ipaddr> | all]
clear dhcp binding [<pool_name 12> [<ipaddr> | all] | all]
show dhcp binding {<pool_name 12>}
show dhcp pool {<pool_name 12>}
show dhcp pool manual_binding {<pool_name 12>}
enable dhcp_server
disable dhcp_server
show dhcp_server
clear dhcp conflict_ip
[<ipaddr> | all]
show dhcp conflict_ip {<ipaddr>}
26-1 create dhcp excluded_address
Description
This command is used to create a DHCP server exclude address. The DHCP server assumes that
all IP addresses in a DHCP pool subnet are available for assigning to DHCP clients. Use this
command to specify the IP address that the DHCP server should not assign to clients. This
command can be used multiple times in order to define multiple groups of excluded addresses.
Format
create dhcp excluded_address begin_address <ipaddr> end_address <ipaddr>
Parameters
begin_address - Specify the starting address of the IP address range.
<ipaddr> - Specify the starting address of the IP address range.
end_address - Specify the ending address of the IP address range.