D-Link SECURICAM Network DDCS-950G, Руководство пользователя

Страница: 53 / 119

49
LAN Settings – If you are using a LAN connection, select either DHCP Connection or Static IP Address. If manually assigning a Static IP, enter your IP Address, IP
Subnet Mask, Gateway IP Address, and DNS into the fields provided.
PPPoE Settings – If you are using a PPPoE connection, enable it and enter the User Name and Password for your PPPoE account.
Port Settings –
y
Web Port : This is the port that allows the user to connect to the camera’s user interface. By default the port is set to 80. You may change the port number if
using multiple cameras.
NOTE: You MUST also set up your router/gateway for Port Mapping; this will enable remote viewing of your camera via the Internet. Please refer to your
router’s instruction manual on how to open up ports. For additional help on configuring your camera to work with your router, please refer to the next
section on setting up your camera for use with a router. For installing multiple cameras, ONE port per camera must be opened on your router, the
Web server (HTTP) port.
y
AV Control Port : This is the port that allows the user to connect to synchronize your IP camera’s audio and video. By default the port is set to 5000. You may
change the port number if using multiple cameras.
y
AV Streaming Port : This is the port used to stream video. By default the port is set to 5001. You may change the port number if using multiple cameras.