D-Link Securicam DCS-3415, Быстрое руководство по установке

Страница: 5 / 24

5 D-Link DCS-3415 Quick Install Guide
Hardware Installation
Hardware Installation
Connect the Ethernet Cable
Connect an Ethernet cable to the Ethernet port
located on the Network Camera’s back panel and
connect the other end to your network.
Connect Using Power-Over-Ethernet
Once you connect an Ethernet cable to your
PoE switch or adapter, the Power LED on the
DCS-3415 will turn green to indicate a proper
connection.
Attach the External Power Supply
Attach the supplied power adapter to the DC
power input connector located on the Network
Camera’s back panel (labeled DC 12V) and
connect the other end to an AC power outlet.
Note: When you have a proper connection, the LED on the network
camera will turn green. The light may go on and off and your computer
may show an intermittent loss of connectivity. This is normal until you
have configured your Network Camera.