D-Link NetDefend DFL-CP310 Скачать руководство пользователя страница 234

Страница: 234 / 485

Using Rules

In this field… Do this…

Redir

edirect the connections to a specific port.

ect to port

Select this option to r

You must then type the desired port in the field provided.

This option is called Port Address Translation (PAT), and is only available

when defining an Allow and Forward rule.

Enabling/Disabling Rules

You can temporarily disable a user-defined rule.

To enable/disable a rule

1. Click

Security

in the main menu, and click the

Rules

tab.

The

Rules

page appears.

2. Next to the desired rule, do one of the following:

•

To enable the rule, click

The button changes to

and the rule is enabled.

•

To disable the rule, click

The button changes to

and the rule is disabled.

218

D-Link NetDefend firewall User Guide

Содержание NetDefend DFL-CP310






































































































































































































































































































































































































































































































Результаты поиска

Содержание NetDefend DFL-CP310

Отзывы:

Бренды по названию

Популярные бренды

D-Link NetDefend DFL-CP310, Руководство пользователя

Результаты поиска

Содержание NetDefend DFL-CP310

Отзывы:

Бренды по названию

Популярные бренды