D-Link GO-DSL-AC750 Скачать руководство пользователя страница 34

Страница: 34 / 131

D-Link Wireless AC Dual-Band ADSL Router User Manual

Section 3 - Configuration

Local IPv6 Network

This section enables you to specify various IPv6 settings.

IPv6 Address:

Use this option to specify a static IPv6 Ad-

dress.

Enable RADVD:

Enable or disable the Router Advertisement

Daemon

Enable DHCPv6 Server:

Enable or disable the DHCPv6 server func-

tion.

Lan Address Config Mode:

Select either stateless (host requests) or

stateful (server provisions) LAN IPv6 address-

ing.

Start/End Interface ID:

Enter the range of IP addresses the DHCPv6

server can issue from.

DHCPv6 Lease Time:

The lease time determines the period that

the host retains the assigned IP addresses

before the IP addresses change.

DHCPv6 Valid Time:

Specify the period for which an assigned IPv6

address remains valid.

IPv6 DNS Mode:

Allow the router to accept the first received

IPv6 DNS assignment from a WAN connec-

tion. Alternatively, you can manually enter

the IP addresses for primary and secondary

IPv6 DNS servers.

WAN Interface:

Specify the WAN interface to be used.

Primary DNS:

Enter an address for a preferred DNS Server.

Secondary DNS:

Enter an address for an alternate DNS Server.

Get Prefix Mode:

Use this option to specify whether IPv6 Prefix

delegation is assigned manually or via a WAN

interface.

WAN Interface:

Specify the WAN interface to be used. for IPv6

prefix delegation.

Site Prefix:

Manually assign an IPv6 prefix delegation.

Содержание GO-DSL-AC750




































































































































Результаты поиска

Содержание GO-DSL-AC750

Отзывы:

Бренды по названию

Популярные бренды

D-Link GO-DSL-AC750, Руководство пользователя

Результаты поиска

Содержание GO-DSL-AC750

Отзывы:

Бренды по названию

Популярные бренды