manualshive.com logo in svg

D-Link GO-DSL-AC750, Руководство пользователя

Поделиться
Скачать
D-Link GO-DSL-AC750 Скачать руководство пользователя страница 32

27

D-Link Wireless AC Dual-Band ADSL Router User Manual

Section 3 - Configuration

Local Network

When configuring the router for the first time, we recommend 

that you click use the 

Internet Connection Setup Wizard

, and follow 

the instructions on the screen. This wizard is designed to assist 

user with a quick and easy method to configure the Internet 

Connectivity of this router.

Anytime during the Internet Connection Setup Wizard, the user 

can click on the 

Cancel

 button to discard any changes made and 

return to the main page.

Router IP Address:

Enter the IP address of LAN interface. It is

recommended to use an address from a 

block reserved for private use. This address 

block is 192.168.1.1- 192.168.255.254.

Subnet Mask:

Enter the subnet mask of LAN interface. The 

range of subnet mask is from 255.255.0.0 to

255.255.255.254.

Domain Name:

Enter a domain to be used as a static host 

name.
Check “

Configure the second IP Address 

and Subnet Mask for LAN

” to enable a local 

alias IP address if required.

IP Address:

Enter the alias IP address.

Subnet Mask:

Enter the alias subnet mask.

Содержание GO-DSL-AC750




































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды