DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide
248
Parameter
Description
Unit
Select the Switch’s unit ID that will be used here.
From Port ~ To Port
Select the Switch’s port range that will be used here.
Direction
Specifies to apply the policy map for ingress flow on the interface.
Network QoS Policy Map
Name
Enter the network QoS policy map’s name here. This name can be up to 32
characters long. Select the
None
option to not associate this configuration with a
network QoS policy map.
Click the
Apply
button to accept the changes made.
PFC Port Settings
This window is used to display and configure the Priority-based Flow Control (PFC) port settings.
To view the following window, click
QoS > QoS PFC > PFC Port Settings
, as shown below:
Figure 7-25 PFC Port Settings Window
The fields that can be configured in
PFC Port Settings
are described below:
Parameter
Description
Unit
Select the Switch’s unit ID that will be used here.
From Port ~ To Port
Select the Switch’s port range that will be used here.
Willing
Select to enable or disable the willing feature here. This is used to turn on the
Data Center Bridging Exchange Protocol (DCBX) PFC willing feature which
indicates that the specified local port(s) is/are willing to accept PFC configurations
from a remote system.
Click the
Apply
button to accept the changes made.
The fields that can be configured in
Clear
PFC Counters
are described below:
Parameter
Description
Unit
Select the Switch’s unit ID that will be used here.
From Port ~ To Port
Select the Switch’s port range that will be used here. Select the
All
option to
specify that all ports will be used here.
Frame Type
Select the frame type that will be cleared here. Options to choose from are:
Содержание DXS-3400 SERIES
Страница 1: ......
