DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide
207
Parameter
Description
Database
Select this option to display all the related entries in the routing database instead
of just the best route.
Hardware
Select this option to display only hardware routes. Hardware routes are routes
that have been written into the hardware chip.
Summary
Select this option to display a summary and count of the route sources configured
on the Switch.
Click the
Find
button to locate a specific entry based on the information entered.
Enter a page number and click the
Go
button to navigate to a specific page when multiple pages exist.
Route Preference
This window is used to display and configure the preference setting of the IPv4 default route and static route. The
distance of the default route and the static route will be compared with other IPv4 routes learned by the dynamic
routing protocol if they have the same destination network address. The lower distance value is preferred.
To view the following window, click
L3 Features > Route Preference
, as shown below:
Figure 6-26 Route Preference Window
The fields that can be configured are described below:
Parameter
Description
Distance Default
Enter the administrative distance of default routes here. The range is from 1 to
255. By default, this value is 1.
Distance Static
Enter the administrative distance of static default routes here.
The range is from 1
to 255. By default, this value is 60.
Click the
Apply
button to accept the changes made.
IPv6 General Prefix
This window is used to display and configure the VLAN interface’s IPv6 general prefix settings.
To view the following window, click
L3 Features > IPv6 General Prefix
, as shown below:
Содержание DXS-3400 SERIES
Страница 1: ......
