D-Link 10 Gigabit Ethernet Switch User Manual
3
3
9
9
The fields that can be configured are described below:
User Name:
Enter the user account name here. This name can be up to 32 characters long.
Privilege:
Select the privilege level for this account.
Password Type:
Select the password type for this user account here. Options to choose from are
None
,
Plain Text
and
Encrypted
. When selecting Encrypted, the password will not be encrypted from the plain-
text format to the encrypted format. Instead, the encrypted password must be entered.
Password:
After selecting
Plain Text
or
Encrypted
as the
Password Type
, enter the password for this
user account here.
Click
Apply
to accept the changes made.
Click
Delete
to remove the specified entry.
Enter a page number and click
Go
to navigate to a specific page when multiple pages exist.
After clicking the
Session Table
tab, the following page will appear.
Figure 4.44 – Management > User Accounts Settings (Session Table)
A list of active user account session will be displayed.
Management > Password Encryption
This window is used to configure whether to save the encryption of the password in the configuration file.
Figure 4.45 – Management > Password Encryption
The fields that can be configured are described below:
Password Encryption State:
Enable or disable the encryption of the password before stored in the
configuration file.
Click
Apply
to accept the changes made.
Management > SNMP > SNMP Global Settings
This window is used to configure the SNMP global settings and trap settings.
