D-Link DWL-8500AP Скачать руководство пользователя страница 62 | Manualshive

Страница: 62 / 168

background image

62 © 2001-2008 D-Link Corporation. All Rights Reserved.

D-Link Unified Access Point Administrator’s Guide

NOTE: After you configure the radio settings, you must click Update to apply the

changes and to save the settings. Changing these access point settings might
cause the AP to stop and restart system processes. Additionally, changing the
Super AG setting will cause the AP to reset. If this happens, wireless clients
will temporarily lose connectivity. We recommend that you change access
point settings when WLAN traffic is low.

Configuring Virtual Access Points

You can configure virtual access points (VAPs) to segment the wireless LAN into multiple
broadcast domains that are the wireless equivalent of Ethernet VLANs. You can configure up
to eight VAPs on a radio. The VAPs simulate multiple APs in one physical access point.

For each VAP, you can customize the security mode to control wireless client access. Each
VAP can also have a unique SSID. Multiple SSIDs make a single access point look like two or
more access points to other systems on the network. By configuring VAPs, you can maintain
better control over broadcast and multicast traffic, which affects network performance.

You can configure each VAP to use a different VLAN, or you can configure multiple VAPs to
use the same VLAN. VAP0 is always enabled and is assigned to VLAN 1 by default.

For the DWL-8500AP, VAP0 is always enabled on both radios, and VAPs can use a VLAN
whether the VLAN is on the same radio or on a different radio.

The access point adds VLAN ID tags to wireless client traffic based on the VLAN ID you
configure on the VAP page or by using the RADIUS server assignment. If you use an external
RADIUS server, you can configure multiple VLANs on each VAP. The external RADIUS
server assigns wireless clients to the VLAN when the clients associate and authenticate. For
more information about using a RADIUS server to manage VLANs, see

“Configuring the

RADIUS Server for VLAN Tags”

on page 122.

If wireless clients use a security mode that does not communicate with the RAIDUS server, or
if the RADIUS server does not provide the VLAN information, you can assign a VLAN ID to
each VAP. If the wireless client is not assigned a VLAN through any other method, the AP
assigns the VLAN ID specified in the VAP to all wireless clients that connect to the AP
through that VAP.

NOTE: Before you configure VLANs on the AP, be sure to verify that the switch and

DHCP server the Unified Access Point uses can support IEEE 802.1Q
VLAN encapsulation.

«
...
60
61
62
63
64
...
»

Содержание DWL-8500AP









































































































































































Отзывы:

Нет отзывов

Похожие инструкции для DWL-8500AP

Бренд: Canon Страницы: 4

Wireless G54 USB

Бренд: Sandberg Страницы: 24

Бренд: Ubiquiti Страницы: 13

Бренд: Cerio Страницы: 53

Бренд: NetComm Страницы: 50

AirPremier DAP-2565

Бренд: D-Link Страницы: 4

Бренд: D-Link Страницы: 48

Бренд: D-Link Страницы: 69

Бренд: D-Link Страницы: 91

AirPlus Xtreme G DWL-2000AP

Бренд: D-Link Страницы: 12

AirPremier DWL-1700AP

Бренд: D-Link Страницы: 12

AirPremier DWL-3200AP

Бренд: D-Link Страницы: 8

AirPremier DWL-2210AP

Бренд: D-Link Страницы: 16

AirPremier DAP-2565

Бренд: D-Link Страницы: 13

AirPremier DWL-1700AP

Бренд: D-Link Страницы: 79

Бренд: D-Link Страницы: 139

Бренд: D-Link Страницы: 98

AirPremier DWL-00AP

Бренд: D-Link Страницы: 84

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды