D-Link DWL-8500AP Скачать руководство пользователя страница 133 | Manualshive

Страница: 133 / 168

D-Link DWL-8500AP Скачать руководство пользователя страница 133

Saving Configuration Changes 133

B CLI for AP Configuration

NOTE: The commands and examples in this appendix use radio 1. To configure and

view information about the second radio, replace the “wlan0” portion of the
interface name with wlan1. Use the command

get radio all

to view

information about the radios on the Unified Access Point.

Saving Configuration Changes

The Unified Access Point maintains three different configurations.

•

Factory Default Configuration - This configuration consists of the default settings
shipped with the access point (as specified in

“Default Settings for the Unified Access

Points”

on page 19).

You can always return the AP to the factory defaults by using the

factory-reset

command.

•

Startup Configuration - The startup configuration contains the settings with which the
AP will use the next time it starts up (for example, upon reboot).

To save configuration updates made from the CLI to the startup configuration, you must
execute the

save-running

or

set config startup running

command from the CLI

after making changes.

•

Running Configuration - The running configuration contains the settings with which the
AP is currently running.

When you view or update configuration settings through the command line interface (CLI)
using

get

,

set

,

add

, and

remove

commands, you are viewing and changing values on the

running configuration only. If you do not save the configuration (by executing the

save-

running

or “

set config startup running

” command at the CLI), you will lose any

changes you submitted via the CLI upon reboot.

The

save-running

command saves the running configuration as the startup configuration.

(The

save-running

command is a shortcut command for

set config startup running

,

which accomplishes the same thing)

Settings updated from the CLI (with

get

,

set

,

add

,

remove

commands) will not be saved to

the startup configuration unless you explicitly save them via the

save-running

command.

This gives you the option of maintaining the startup configuration and trying out values on the
running configuration that you can discard (by not saving).

By contrast, configuration changes updated from the Web UI are automatically saved to both
the running and startup configurations. If you make changes from the Web UI that you do not
want to keep, your only option is to reset to factory defaults. The previous startup
configuration will be lost.

wlan0bssvapx

The basic service set interface for the x VAP on radio 1 - 802.11a radio. The value
for x ranges from 0-7. The DWL-3500AP does not have this interface.

wlan1bssvapx

The basic service set interface for the x VAP on radio 2 - 802.11b/g radio. The
value for x ranges from 0-7.

Table 33.

Interface Naming Convention

Interface

Description

«
...
131
132
133
134
135
...
»

Содержание DWL-8500AP









































































































































































Отзывы:

Нет отзывов