D-Link DWL-8500AP, Руководство администратора

Страница: 138 / 168

138 © 2001-2008 D-Link Corporation. All Rights Reserved.
D-Link Unified Access Point Administrator’s Guide
Radio Settings
Table 38 shows the Radio Settings commands. The commands in this table use radio 1
(
wlan0
). To change the wireless settings for radio 2, use
wlan1
.
View the radio channel.
get radio wlan0 channel
Set the radio channel to a static channel.
set radio wlan0 channel-policy static
set radio wlan0 static-channel <channel>
Set the radio channel to “Auto”
set radio wlan0 channel-policy best
Table 38.
Radio Setting Commands
Action Command
View a description of the
radio interfaces
get radio all description
Turn the radio on
set radio wlan0 status on
Turn the radio off
set radio wlan0 status off
View the current radio mode
get radio wlan0 mode
Set the radio mode to IEEE
802.11b
set radio wlan1 mode b (only applicable for radio
interface wlan1)
Set the radio mode to IEEE
802.11g
set radio wlan1 mode g (only applicable for radio
interface wlan1)
Set the radio mode to IEEE
802.11a
set radio wlan0 mode a (only applicable for radio
interface wlan0)
Set the radio mode to
Dynamic Turbo 5 GHz
set radio wlan0 mode dynamic-turbo-a (only
applicable for radio interface wlan0)
Set the radio mode to
Dynamic Turbo 2.4 GHz
set radio wlan0 mode dynamic-turbo-g (only
applicable for radio interface wlan1)
Enable Super-AG Mode
set radio wlan0 super-ag yes
Disable Super-AG Mode
set radio wlan0 super-ag no
View the radio channel.
get radio wlan0 channel
Set the radio channel to a
static channel.
set radio wlan0 channel-policy static
set radio wlan0 static-channel <channel>
Set the radio channel to
“Auto”
set radio wlan0 channel-policy best
Set the Beacon Interval
set radio wlan0 beacon-interval <20-1000>
Set the DTIM Interval
set radio wlan0 dtim-period <1-255>
Set the Fragmentation
Length Threshold
set radio wlan0 fragmentation-threshold <256-2346>
Set the RTS Threshold
set radio wlan0 rts-threshold <0-2347>
Set the maximum number of
clients allowed to associate
(VAP 0 radio 0)
set bss wlan0bssvap0 max-stations <0-256>
Table 37.
Wireless Setting Commands
Action Command